Strong wood countertops are all-natural items made from timber from trees roughly 120 years of ages. Wood is a living material and also the more wetness obtains, the much more the timber countertop will broaden. The timber we used in solid timber worktops has actually been previously kiln dried to a moisture degree of 6%, and it is as a result important that the worktop is not exposed to a regularly high degree of humidity. Generally the humidity level in kitchen areas is around 50-70%.
The strong timber top must be connected to the cupboard box making use of just timber screws and also washers. It is not recommended whatsoever to glue the top on the cupboard box; the leading as well as package increase and also get at various prices, consequently splits could at some point show up, most possibly on the closets' surface area.
The correct means of mounting a strong timber top is utilizing metal dealings with along the closet box (see our websites).
The metal mendings should be consistently distributed throughout the size of the top, spaced at a 1' - 1.5' range from each various other. Across the width, the top is usually dealt with to each steel support with three screws, one in the center, one towards the front edge and one towards the rear side. The assistances have to be perfectly leveled; or else tensions can develop in the wood, leading to warping, cupping, or cracks.
We suggest pre-drilling the screw holes into the wood kitchen counter, to avoid cracks and also divides. For the exact same reason, it is an excellent concept not to over tighten the screws. The finishing will substantially reduce the degree of such movements, yet Butcher Block Co Live Edge cutting boards will not eliminate them completely. Because of the panel's laminated structure, the lengthwise activities are unimportant, so the installer should take notice of the motions occurring throughout the panel's width. In order to protect against the development of internal tensions, the holes in the steel dealings with should be extended in the instructions of the motions (see our website ).
When revealed to normal moisture degrees - i.e. 50-60% - the worktop's width will broaden by 1/12"-1/ 24", yet when exposed to a level of 80-90%, this measurement might increase by up to 1/2" or perhaps a lot more for some varieties. For that reason, when the rear side of the counter top is mounted versus a wall surface, the wall might restrict the top's natural motions, bring about undesirable tensions in the wood. To avoid this, you can allow a 1/4"-1/ 2" joint between the wall and the counter top edge as well as caulk it with a thin quote of acid-free silicone.
Furthermore, you can securely take care of the back edge to the metal supports beneath and thus, allow the natural movements to occur at the expense of the contrary side.
In this situation, the openings in the metal mendings corresponding to the rear side will certainly be no bigger than the screws diameter, while the holes representing the center section and also the leading edge will certainly be lengthened.
For added information relating to the installation of timber kitchen counters, bar tops as well as kitchen islands, please visit our websites.